Dynamometers, Test Heads & Instruments — Digital Torque and Speed Instrument Model 1034

Data Displays & Test Heads - Digital Torque and Speed Instrument Model 1034

Digital Torque and Speed Instrument Model 1034

The Model 1034 Digital Torque and Speed Readout Instrument is designed for use with the Vibrac line of Optical Transducers and Digital Encoders (note: Model 1038 includes Torque, Speed and Angle).

  • This instrument contains a 4-1/2 digit readout for torque and a 5 digit readout for speed. Large (0.5 inch) characters provide for easy viewing.
  • A peak detection circuit is provided for capturing peak torques and the speed at which they occur.
  • The front panel selector switch ranges the instrument for use with the selected Vibrac Dynamometer.
  • A front panel control knob enables the user to zero the transducer. This process automatically establishes the span or calibration of the transducer to the instrument.
  • A 0 to 10 volt analog output proportional to the torque and speed is supplied on the rear panel for use with the auxiliary equipment including PC software applications, oscilloscopes and XY plotters.
  • A remote option package is available to facilitate external computer control of the instrument (consult factory for additional information).
[Photo of Digital Torque and Speed Instrument Model 1034]
 

Readout Instrument

FRONT PANEL DESCRIPTION

TORQUE READOUT — The 4-1/2 digit readout is scaled to read torque in direct engineering units or in percent full scale.

SPEED READOUT — The 5 digit readout is scaled to read speed in RPM.

POWER — System power switch.

HOLD — The lighted push-button switch, when engaged, will HOLD or LOCK the displays.

RESET — The lighted push-button switch, when engaged, will reset the peak holding circuits.

PEAK — The lighted push-button switch, when engaged, will display peak torque and speed from the internal peak detecting circuits.

ZERO ADJUST — For setting the proper zeroing voltage for the transducer that is connected to the instrument.

TRANSDUCER SELECTOR — The thumb wheel switch is for selecting the proper ranging and the desired display units for the transducer that is connected to the instrument.

GENERAL SPECIFICATIONS

INPUT POWER — 115 v AC 60 Hz (optionally available 220 v AC 50 Hz)

DIMENSIONS — Height 9 in (23 cm) x Width 20.5 in (52 cm) x Depth 19 in (48 cm)

WEIGHT — Approximately 30 lbs (13.6 kg)

[Diagram of Digital Torque and Speed Instrument Model 1034]

Drawings are for illustrative purposes only.
Contact Vibrac for current specifications.