Test-All II Torque Tool Calibrator — Operating Specs

Test-All II Torque Tool Calibrator Adding a New Twist to the Calibration of Torque Tools

General Specifications:

  • Dimensions: 10"W x 12"D x 14"H
    (25cm x 30cm x 36cm)
  • Weight: 25 lbs (11.4 kg) unpacked
  • Temp Range: 32°F to 104°F (0°C to 40°C)
  • Humidity: Up to 90% condensing
  • Input Power: 100-240 VAC 50/60 Hz
  • Accuracy: ± 0.5% full scale
  • Resolution: 0.1%


Available Torque Capacities:

  • CAL-100-10: 0 to 10 oz-in max
  • CAL-100-100: 0 to 100 oz-in max
  • CAL-200-10: 0 to 10 lb-in max
  • CAL-200-20: 0 to 20 lb-in max
  • CAL-200-30: 0 to 30 lb-in max
  • CAL-200-50: 0 to 50 lb-in max
  • CAL-200-100: 0 to 100 lb-in max


Live Torque Graph

During a test, the Test-All II Calibrator digitally displays the live torque. A live torque graph enables the user to more consistently perform valuable torque tests which are repeatable, reliable and accurate. Peak torque will automatically be displayed at the conclusion of a test.

Live Torque Graph


Calibrate On-Site

The Test-All II Calibrator is factory calibrated and is supplied with a NIST traceable calibration certificate. The system can be calibrated in the field by using our Calibration Kit and Weights. The calibration procedure is visually displayed onscreen and be accomplished by just following the instructions as shown on the touch screen. Three examples are shown below:

 
Calibration Chart
Calibration Chart
Calibration Chart
 



Field Calibration Kit

The Test-All II Calibrator Field Calibration Kit consists of a calibration bracket, calibration beam and a set of three weights.

Calibration Field Kit