General Torque Testing

Torqo Test-All

	Testing Made Easy The system control panel is as easy to use as dialing a telephone. An operator can become proficient in a few hours of use.
	Torque Display This four-digit readout is used to report test results and display numerical data in the programming mode.
	Test Status Indicators At a glance, the user can determine what mode is selected and whether or not the system is ready to perform a test.
	Keypad The keypad is the communication link between the system and the user.

 Programming Features 

• Uni-directional Test:  This test will rotate the DUT (Device Under Test) in the direction selected on the keypad and the peak torque will be measured and displayed. The test results can be saved in memory or outputted. The test speed and the distance or time to test must be programmed.
• Bi-directional Test:  This test will rotate the DUT, first in the direction selected on the keypad and then in the opposite direction. The peak torque will be measured and displayed for both directions. The test speed and the distance or time to test must be programmed.
• Set Torque Test:  This test will rotate the DUT in the direction selected on the keypad until the set torque is achieved or the torque drops off suddenly. Once again the results will be captured and displayed.

System Features

• Simple keypad programming
• Uni & Bi-directional testing
• Life Testing capability
• Automatic data logging
• Mechanical overload protection
• No analog circuits
• Instant on – No warm up
• Battery backed up memory
• Memory for 1000 samples
• RS 232 output port

Technical Specifications

Physical Characteristics:
Dimensions:	24” wide, 11” deep, 12” high
Weight:	35 lbs. Unpacked (less tooling)
Operating Environment:
Temperature Range:	32°F to 104°F
Humidity Range:	Up to 90% non-condensing
Power Requirements:
Input Power:	110 VAC 60 HZ normal, 220 optional
Available Torque Capacities:
1570-100	0 to 100 Oz-In Max
1572-10	0 to 10 Lb-In Max
1572-20	0 to 20 Lb-In Max
1572-30	0 to 30 Lb-In Max
Measurement Specifications:
Accuracy:	±.5% full scale
Resolution:	0.1%
Drive Specifications:
Speed Range:	Direction:
1 to 50 RPM	Bi-directional